Good Product

Adast, a 26- and 29-inch press, has two half-format traditional presses, the 26-inch 700 series and the 29-inch 800 series. The 700 series can be printed in one to five colours with optional on-line coating. Standard double-sided printing configuration, up to 10,000 copies per hour. The 800 series is a 2 to 6-color double-sided printing press. Can be equipped with automatic blanket cleaning and semi-automatic solid-printing device, with preset printing program, high and low speed control, and alcohol dampening circulation cooling system, infrared dryer, hole register registration device and other functions, but also can be converted to anhydrous Offset press, maximum speed 12,000 iph. Each of the above Adast machines has an ink control system. Double-sided printing Akiyama offers the Bestech 28 and J Print series presses. The Bestech 28 can be printed in 2 to 8 colors, but according to Martin Patterson, the company’s marketing manager, few users buy printers under six colors. The plate cylinder is three times the normal size and the transfer roller is four times. The number of paper transfer times is reduced by an average of four times. Because the printing cylinder of the printing press is large, the curvature is very small, and the problems of registration and smudge are reduced correspondingly. In addition, the machine is also equipped with console registration, long-distance transmission lines, continuous dampening system and Akiyama color control (ACC), computer CPU chip and data floppy disk drives and other devices. In addition, automatic paper presets, print presets, automatic plate change, and blanket cleaning are optional configurations. The entire press has a production speed of 13,000 sph. The J Print Series is available in 26-inch and 29-inch versions and can be printed on both sides. Each device has its own plate, blanket, printing roller, and transfer roller. Paper operations are few, waste is minimal, and registration is high. The J Print press is compact and has a short ready time. The prepress preset system is basically similar to the Bestech type. Optional automatic blanket cleaning, paper presets, ink cleaning and plate replacement devices. Speed ​​of 13,000sph. Special and Efficient KBA North America launched their 29-inch Rapida 74 presses at drupa, and many European print shops have since started installing their products. According to Paul Boo, the company's director of marketing, said: "The market responds well." The Rapida 74 is suitable for general general commercial printing and special printing such as packaging boxes or plastics. It adopts a combined structure, can do 10 color printing, coating or not optional. The variety of printing substrates, the high degree of automation, the ready time is very short, and the production capacity is very strong. It also has an electronic control station and ink color control system that can print up to 15,000 prints per hour. Two sets of equipment Two markets Komori's two medium presses target two different markets. The Lithrone series is suitable for already-formed commercial printers, while the Sprint series is suitable for use in small-lot short-run printing in copy shops or printing houses that want to expand their business. The Sprint Series is available in 26- and 28-inch versions, single- and dual-color printing. There are semi-automatic version change, automatic ink roller cleaning, blanket cleaning, double-sided printing, button control and remote register. Lithrone series medium presses are available in 20, 26, and 28 models and can print from two-color to six-color printing. The printing cylinder and the transfer roller are twice as large as the common type, and have features such as less replacement of cavities, small pass point, high registration accuracy, little wrinkling of paper, single sheet smoothness, and the like, and can also be printed on thick substrates. Optional automatic devices include plate replacement, automatic ordering, and print quality control. Other features include double-sided printing, reverse printing, double coating, multi-system output, and more. The Lithrone 20 has a printing speed of 10,000 copies per hour, and Lithrone 26 and 28 have 15,000 copies. The rejuvenated Heidelberg 29-inch Speedmaster 74 can print 15,000 copies per hour, from monochrome to ten colors. Its main feature is the adoption of the Heidelberg CP2000 central CNC system to control the entire press and its accessories. Other new features include automatic plate change, computer-controlled printing rollers, printing cylinders and blanket cleaning. Ink and color control systems are the Speedmaster 102 and the Aldrich system in Heidelberg. The machine is ready for a short time and there is less power to start up. The Printmaster 74, introduced to the United States at the Graph Expo, has both automatic and manual printing capabilities and is a relatively cost-effective variant of a four-spread press. The clamping device of this machine has the characteristics of rapid and accurate, simple technology, and the size of the printing plate is the same as that of the Speedmaster 74. It can be used on mainframes without reducing its function. The machine is also equipped with Alcolor dampening system and laser ink separation device, both single and double color printing. Compact and double-sided printing Manroland has two 29-inch style presses, 200 compact and 300 double-sided series. 200 models can be double or four-color printing with a base thickness of 32pt. The console is integrated with the output section, saving space. JobCard printers can print bank credit card-sized cards, have ink setting data storage functions, and print cylinders and conveyors are double the size of ordinary devices, but do not have a transfer drum. There is a special transfer device between the units to keep the paper feeding process stable, and the remote ink control (RCI) system also effectively shortens the readiness preparation time. The maximum speed of the press can reach 13,000sph. The manroland 300 has a maximum print size of 23 x 29 inches and six colors or more. Standard double-sided configuration and RCI ink control system. Automatic feeding settings, optional paper thickness, size and preset ink fountain. Other optional devices are automatic plate fixation, online single and double roller coating. The machine is dried by conventional or UV methods and can print up to eight colors with in-line coating capabilities. Ten-group printing presses Mitsubishi 28-inch 1F presses can be composed of up to ten groups in parallel with an aqueous coating tower. The machine is equipped with Mitsubishi's versatile three-way dampening system, and has functions such as speed preset, remote register, press preset, automatic paper setting, and quick platelet. The change-over system is semi-automatic and can be equipped with a flexographic device, with a print speed of 13,000 to 15,000 sheets per hour. Due to the special roller device, the machine can eliminate the increase of the back tension when printing large-size paper. The control table can also automatically adjust the paper size and replace the job, support the CIP3 protocol and match the spectrometer to achieve ink control and other functions. The print thickness is 0.0002~0.024 inches. The extended business press Polly USA is planning to release its 29-inch 74 series presses, available in Q2 and Q3. The company also offers 26-inch 65 Series printers designed for small print companies. Because this model saves a lot of automation facilities, so the price is very low, suitable for small businesses. The machine can be composed of up to five groups of units and equipped with a double-sided printing system, using electronically controlled program settings and a hydraulic drive system, which is simple to operate and easy to replace. The 74 series machines, due to the large number of automated parts, have a very fast printing speed of 13,000 sheets per hour and a printing thickness of 20 pt. Color Control Sakurai's Oliver-72EDII 28-inch series printers can print four, five or six colors, have optional coating capabilities, and have an extended output system. The plate was changed to Sakurai's SPC system, and the security version was Sakurai Auto Set (SAS) robot. Paper size can be preset, printing, plate cylinder can be adjusted. Others include the Type Sakurai Color Console (SCC) console, print adjustment display, an automatic roll cleaning, a continuous dampening system, and a suction-loading conveyor and remote register adjustment. Flexible format Shinohara USA offers two medium presses, 66 Series (26 inches) and 74 Series (29 inches). General Manager Leo Caparoni said that the 74 series is highly competitive in general general commercial printing, and it is purely a “paper” printer and cannot be used for cardboard and thick substrates. There are two types of this series of machines: one for the largest format 23X29-inch printing, the other is 2029-inch printing. The entire printing facility performs two to eight color printing, with variable duplex printing and an aqueous or UV coating tower and electronically controlled table and other devices. All Shinohara series can use CIP3 for data transmission.