Acrylic Water Base Aluminum Foil Tape (2012-SHARP)

Material: Pulp
Glue: Solvent-Based Acrylic
Glue Thickness: 0.03mm
Liner: Glassine Paper
Backing: Aluminum Foil /Pet
Backing Thickness: 0.03mm(Al+Pet)
The Total Thickness: 0.06mm
Peel Adhesion: 20n/25mm
Tensile Strength: 55n/25mm
Trademark: XPACK
Transport Package: Plastic Film, Master Carton and Pallet
Specification: Customized
Origin: China
HS Code: 7607200000
Material: Pulp
Glue: Solvent-Based Acrylic
Glue Thickness: 0.03mm
Liner: Glassine Paper
Backing: Aluminum Foil /Pet
Backing Thickness: 0.03mm(Al+Pet)
The Total Thickness: 0.06mm
Peel Adhesion: 20n/25mm
Tensile Strength: 55n/25mm
Trademark: XPACK
Transport Package: Plastic Film, Master Carton and Pallet
Specification: Customized
Origin: China
HS Code: 7607200000
XPACK 1515HL-J Self Wound Aluminum Foil Tape is a polyester-foil backing, combined with a high performance solvent acrylic adhesive and protected by easy release liner.
COMPOSITION    2012HL
GLUE                            Solvent-Based Acrylic
GLUE THICKNESS 0.03mm
LINER Glassine paper
BACKING Aluminum Foil /PET
BACKING THICKNESS 0.03mm(AL+PET)
THE TOTAL THICKNESS 0.06mm
Peel Adhesion 20N/25mm
Tensile Strength  55N/25mm
Tack Rolling Ball ≥4#
Elongation  4%
Foam Combination Rate  90%
Working Temperature -120ºC~150ºC
Apply Temperature  10ºC~40ºC


Storage And Useage Conditions     
 
From the date ofproduction 24 months,stored in a cardboard box, the temperature 21 ºC, relative Humidity less than 50% of the environment.


Applied Technology
Adhesive strength depends on the extent of theadhesivebetween glue
and surface. Surfaces to which tape is applied should be clean, dry and free of grease, oil, moisture, dirt and other contaminants. Using some surface cleaners such as isopropanol, ethanol or heptanes.
The tape's ideal application for temperature range of 70-100ºF(21ºC to 38ºC).The tape is not recommended for use on a temperature below 50ºF(10ºC) surface. Because the adhesive becomes hard so stick force smaller.However, once properly applied,low temperature operation generally meet the requirements.

Application Market
•Bundlestickintherefrigeratorcoils
• Moisture Barrier And Seal the pipe
• Temperature Insulation
• decoration, protection, maintenance, shut down

ertificate / Accreditation
MSDS:XPACK provide the product MSDS.
RoHS: accord with the requirement of eu RoHS, and can provide the relevant certificates.
TSCA:The product under the Toxic Substances Control Act is defined as supplies, therefore, the product is not in the requirements.

More information please contact with Ms.Yaki
yaki@xpack.cc



  XPACK 1515HL-J Self Wound Aluminum Foil Tape is a polyester-foil backing, combined with a high performance solvent acrylic adhesive and protected by easy release liner.
COMPOSITION    2012HL
GLUE                            Solvent-Based Acrylic
GLUE THICKNESS 0.03mm
LINER Glassine paper
BACKING Aluminum Foil /PET
BACKING THICKNESS 0.03mm(AL+PET)
THE TOTAL THICKNESS 0.06mm
Peel Adhesion 20N/25mm
Tensile Strength  55N/25mm
Tack Rolling Ball ≥4#
Elongation  4%
Foam Combination Rate  90%
Working Temperature -120ºC~150ºC
Apply Temperature  10ºC~40ºC


Storage And Useage Conditions     
 
From the date ofproduction 24 months,stored in a cardboard box, the temperature 21 ºC, relative Humidity less than 50% of the environment.


Applied Technology
Adhesive strength depends on the extent of theadhesivebetween glue
and surface. Surfaces to which tape is applied should be clean, dry and free of grease, oil, moisture, dirt and other contaminants. Using some surface cleaners such as isopropanol, ethanol or heptanes.
The tape's ideal application for temperature range of 70-100ºF(21ºC to 38ºC).The tape is not recommended for use on a temperature below 50ºF(10ºC) surface. Because the adhesive becomes hard so stick force smaller.However, once properly applied,low temperature operation generally meet the requirements.

Application Market
•Bundlestickintherefrigeratorcoils
• Moisture Barrier And Seal the pipe
• Temperature Insulation
• decoration, protection, maintenance, shut down

ertificate / Accreditation
MSDS:XPACK provide the product MSDS.
RoHS: accord with the requirement of eu RoHS, and can provide the relevant certificates.
TSCA:The product under the Toxic Substances Control Act is defined as supplies, therefore, the product is not in the requirements.

More information please contact with Ms.Yaki
yaki@xpack.cc



 

Meat Processing Machines

As one of the earliest enterprises specializing in meat food processing machinery, Helper Group integrates research and development, production, sales and service in the modern management system. Our company has now set up scores of equipment used in the field of meat processing such as frozen meat breaker series, meat block grinder series, chopper and mixer series, saline injector series, tumbling machine series, smoke oven series, filling machine series, sausage linker series, clips tying machine series etc.We also provide sausage lines,vacuum sausage filler,vacuum stuffer.



meat processing machines overview

Sausage Separator Series,Chopper And Mixer Series,Clipping System Solutions,Sausage Lines,Vacuum Sausage Filler,Vacuum Stuffer

Helper Machinery Group Co., Ltd. , https://www.helperfoodequip.com

Posted on