The accuracy of the watch is a kind of talk

When talking about a car, it may be a matter of speeding up. When discussing a mobile phone, it will look at the battery life and memory data. But when it comes to a watch, its accuracy is not a place for propaganda.

Since mechanical watches are factors of physical principles, there will always be errors. Therefore, it is normal for a few seconds a day to go. It takes more than 80,000 seconds a day, and the watch within 10 seconds of error has been considered accurate. . But when we spend tens of thousands or even more to buy a watch, we still nitpickingly want it to be accurate for a second or two. Why is this?

The accuracy of the watch is a kind of talk

Just as we discuss the income of people in the workplace, the speed of cars, and the endurance of mobile phones, we will treat this function as a convention. In fact, the tourbillons produced by the major brands can indeed play a role in improving performance, but they are limited to such situations including the (normally stationary) balance wheel being vertically aligned. On the watch, the tourbillon is difficult to achieve because the wearer has been moving his wrist in various ways. Will hundreds of thousands of newly purchased tourbillon mechanical watches be more accurate than just tens of thousands of watches without a tourbillon?

In many cases, it does not. The appearance of the tourbillon must look bigger and cooler, so having this “cool” has also become a kind of talk.

The accuracy of the watch itself is a hard indicator

Any international or professional field for watch standards must involve the concept of precision. The powerful watch factories and organizations are constantly updating their standards because of modern watchmaking techniques.

For example, for precision chronometer observatory certification standards, movement certification tests must be controlled for -4/+6 seconds a day. The top-level observatory certifications updated by Rolex in 2015 require an average daily differential of -2/+2 seconds after assembly. Patek Philippe has already increased the watch accuracy to -1/+2s per day for watches in the most advanced technological research topics in 2017. The Patek Philippe mark that was used in 2009 is required to have an accuracy of -3/+2s per day.

However, we must also make it clear that the accuracy of the watch, in addition to its own quality, has a lot to do with the daily wear habits of the watch-friends. We should not confuse the watch with accuracy that is accurate to almost zero errors each day.

The precision of the watch cannot be used as a measure of the value of a watch. Under such a mature environment of modern watchmaking technology, everyone can already control the accuracy to a very subtle point, and it is of little significance to further entangle the watch.

Accuracy is the basis for our judgment on whether the watch has a problem

At the same time, it is worth our attention that the accuracy of a watch is often a reference for us to judge whether it needs repair and maintenance. Most watchmates do not configure the detection equipment of the watch at home. When a watch is worn normally, if the watch is found to go faster and slower, the most direct performance is that the daily error is very unstable. Basically, we can judge the watch has a problem, need to do the test, there may be magnetic, there may be a problem due to knocking inside.

The more consumers feel the better the precision of the movement. Often, it is also true that consumers themselves find the brands they trust most, such as the current Rolex.

Accuracy makes sense for the brand

From the brand point of view, the accuracy of the watch is a good publicity point to establish a brand image. The higher the precision, the better the watchmaking standard. Rolex dares to publicly claim that its top-level observatory certified watch can achieve a daily error of -2/+2s per day, after a series of simulated wear tests, and that Rolex's annual output is close to one million watches, and so many tables have reached this precision It is indeed shocking, and Rolex did it. This is its value.

People in the watch industry often say that “people don't wear watches for time.” Throughout history, any major technological innovations in watchmaking are devoted to further enhancing the performance of watches, to watchmakers, and precision is faith. But for us, it's actually a matter of seconds whether the watch is fast or slow, so the accuracy of the watches we talk about is more about the connection between the watch and our daily life.

Million World

Global Watch Information Interactive Platform

Pet Curved Thinning Scissors

Pet Razor Scissors,Pet Curved Thinning Scissors,6.5 Inch Pet Grooming Scissors,Professional Dog Grooming Scissors

Zhangjiagang Mister Tools Co., Ltd , https://www.mingshitools.com