[ Zhonghua Wardrobe ] Simple wooden wardrobes are affordable, easy to use, small and exquisite, and do not occupy a place. They are wardrobe products that we use for school or outside school. But how to assemble a simple wooden wardrobe?
step one
We first put it down on the left side of the wooden cabinet, put the screw on the offset hole, fix the back strip on the screw we just hit, lock the lock handle, and then assemble the top plate. The sides and top of our wardrobe have a simple prototype.
Then the bottom plate, we now put the screw on the bottom plate, fix the upper corner bar, and then combine the assembled bottom plate with the top plate we just made, so that the cabinet part of our wardrobe is relatively simple to present, then Just fix the back strap and the base, and make sure that the outer part of our simple wooden wardrobe assembly is complete.
Step two
The cabinet part of the simple wooden cabinet was made up, and the next part was the assembly of the pants rack and the drawer. The components needed for our cabinets and drawers are here. First, we put a screw on the sleep of the drawer, put it on the side, lock it with a two-in-one lock, put on the draw, and put it into the bottom plate. Use the self-tapping screws to lock the tail, and then install the sliding rails on the left and right sides of the drawer, so that our drawer style is formed. Then there is the pants rack. First install the steel pipe on the tailboard of the pants rack, then hit the screw on the two ends of the tailboard, then firmly fix the left and right side plates of the pants rack to the two sides of the tailboard, so that the pants rack is assembled. The second step of our simple wooden wardrobe assembly is completed.
Step three
Next, I still need to assemble the parts of our dark cabinet. First, select all the components needed for the dark cabinet, find out the side panels of the dark cabinet, and put the screw on the side panel, put on the pull bar, lock The upper three-in-one lock handle, followed by the panel part of the dark cabinet, first hit the screw, do not forget to install the small pull strip, and then lock the left and right side panels of the panel and the dark cabinet with the three-in-one lock handle, and then in the front block Screw the rod on the strip and install it on the front side of the left and right side panels of the dark cabinet and fix it.
Step four
Put the middle door hinge on the door panel and lock it with self-tapping screws, then put the middle door hinge on all the door panels, fix all the wooden doors of the wardrobe with the self-tapping screws on the closet, and then use the handle to tap the screws. The handle is mounted on the door panel, and then, in the same way, the other two doors are firmly fixed to our closet cabinet.
Step five
Later, the work we have to do is to check, look at the effect of our simple wooden wardrobe assembly, pull the drawer, see if the drawer pulley needs to be adjusted, and then look at the fixing of each screw, if there is no screw tightening Or some areas that need reinforcement are not reinforced, just reinforce it. If all this is fine, then our simple wooden wardrobe assembly is officially completed.
The knife is a must for erver kitchen .And we have great quality awesome product.It is precision forged from single piece of high-carbon German stainless steel; laser-controlled and tested cutting edge.The utility knife is perfect for peeling and paring fruits and vegetables.The chopper is sharp for cutting the food. We have chopper,chef knife, bread knife, caving knife,boning knife,utility knife .
Kitchen Knife,Chef Knife,Kitchen Knife Set,Sharp Kitchen Knives
MEO DEMO CO., LTD. , https://www.meokitchentools.com